- Effective three stage filtration o f particulates including dust and oil droplets
- Charcoal element for removal of organic vapors, Bad odor
- Includes lightweight, robust carry frame, easily detachable for wall mounting
- Pop-up indicator to warn of pre filter clogging
- Auto drain to prevent build-up of oil
- Easy filter element replacement without use of tools
- The units have the capacity to supply air flows to the latest recommendations for Breathing Apparatus and will assist in ensuring air quality can meet EN12021 and BS4275:1997 requirements.
- 01 user Connection – AFU-300
TECHNICAL DATA
| Normal inlet pressure range | 5-8 bar |
| Maximum recommended operating pressure | 10 bar |
| Remaining oil content less than | 0.003mg/m3 at 21ºC |
| Particle removal | 0.01μm |
| Inlet connection | ½” BSP parallel female thread |
Features:
- Effective three stage filtration o f particulates including dust and oil droplets
- Charcoal element for removal of organic vapors, Bad odor
- Includes lightweight, robust carry frame, easily detachable for wall mounting
- Pop-up indicator to warn of pre filter clogging
- Auto drain to prevent build-up of oil
- Easy filter element replacement without use of tools
(02 Men Connection – AFU-300)
TECHNICAL DATA
| Normal inlet pressure range | 5-8 bar |
| Maximum recommended operating pressure | 10 bar |
| Remaining oil content less than | 0.003mg/m3 at 21ºC |
| Particle removal | 0.01μm |
| Inlet connection | ½” BSP parallel female thread |
AFU 25 is Suitable to 5 users. The Unit has the capacity to supply air flow to the latest recommendations for breathing apparatus and will assist ensuring air quality can meet EN 12021 & BS 4275:1997 requirements. Three stage filtration: 1st Stage AO filter is high efficiency coalescing filter that removes dirt particles down to 1 X 10-6 meters in size. Second stage, AA filter is a high efficiency coalescing filter that removes Oil Mist/Water aerosol and dirt particles down to down to 0.01 x 10-6 metres in size, with maximum remaining oil contents of 0.01 mg/m3. The third stage, AC filter is an adsorption bed of activated carbon that removes oil vapours and odours.Air form this stage has a maximum remaining oil contents 0.003 mg/m³ at a temperature of 21º©. An Auto-drain Valve is fitted to each of the first & Second stage filter housing to allow water and other liquids to be drained off safely. The maximum unit inlet pressure is 10 bar.
Breathing Tube : approved as per EN 139 for Breathing Hose
(incl. coupling. to flow control valve)
Heat resistance Breathing Hose
Flow Control Valve: Is designed for Promask Combi (Full Face Mask) or Auto Mask CA The belt mounted control valve enables to adjust the air flow to ensure optimum comfort.
- Constant airflow from 120 l/min to 300 l/min
The T-A-Line system is for use with filtered factory airline supplies and delivers air efficiently and safely to the user. It features an auxiliary air outlet for use with air powered tools.
LIGHTWEIGHT AND COMPACT – comfortable to wear, contoured waist mounted control unit prevents snagging
• AUTOMATIC DEMAND COMPENSATION – maintains optimum airflow to the headtop
• LOW FLOW INDICATOR – clear audible alarm
• AUXILIARY OUTLET – useful for air tools (e.g. spray gun)
• COMBINED ODOUR FILTER AND SILENCER – improves wearer comfort
• OIL CONTAMINATION WARNING – visual indication of oil contaminated air supply
• FULLY ADJUSTABLE – positions on left or right hip
• AIRLINE FILTER UNITS – compatible air filter units for one or two users are included in the range
The T-A-Line is designed for use with the full range of Tornado headtops, but not facepieces T7 and T8. It is fully compatible with the AFU300 and AFU600 Airline Filtration Units.
Very quiet in use
Comfortable belt-mounted lightweight ergonomic designUser adjustable for left or right hip wearingEasily connected with disconnection protection
.
- Face seal mad e up of Silicon Material for added comfort.
- Offers excellent p rotection against gases, vapours, dust, mists, particles and fumes including icocyanates.
- Wide-rangin g applications.
- Constant airflow fro m 120 l/min to 300 l/min
- The face mask incorporates a speech diaphragm wh ich helps in speech transmission while uses at work place.
- The Promask Co mbi can be detached from the compressed air supply and used with a Class 2 Filter with a maximum permissible concentration up to 5000 PPM OR 50 Times of the OEL ( TLV)
• Automask CA has to beequipped with pressure re-ducer valve (PR 062570) andflow meter (Flow meter AM062571)
062280 Silair NR,natural rubber
062281 SilairSil, silicone
Silair includes a lightweight,comfortable half mask which isconnected by a breathing tubeto a belt mounted flow controlvalve CV.
• Small size facepiece enablesSilair to be worn with eye protection, e.g. with a weldingshield
060482 Helmet forabrasive blasting
Sandro provides exceptionalrespiratory protection in variousabrasive blasting operations, e.g.in sandblasting. Sandro meetsthe requirements of EN 271.
• Heavy-duty reinforced helmetprotects head and chest extreme operations
• Sandro has to be equippedwith pressure reducer valve(PR 062570) and flow meter
Lightweight half hood
• Durable PU coated nylon material
• Choice of two sizes for optimum fit
• Broad face seal for comfortableefficient fit
Approvals: EN:12941, EN: 1835 (Respiratory)
• Integrated protection for high risk environments
• Hypalon cape provides excellent chemical resistance
• Provides highest protection factor
• Utilises proven Protector Tuffmaster II safety helmet with ratchet head size adjustment
• Choice of Acetate or Polycarbonate visors
Approvals: EN:12941, EN: 1835, EN:166, EN: 397
Full range of visors available
• Unique monorail visor glidesystem maintains low profile
• Exceptional balance, providescomfortable extended duration use
• Innovative visor seal sweeps thehelmet shell, preventing the
ingress of contaminants
• Quick lock swivel hose connection greatly increases freedom of movement.
Approvals: EN: 12941, EN: 1835, EN:166, EN: 397 & EN: 352-3 Hearing (Optional).
• Compact, low profile PPE combination
• Utilises proven Protector Tuffmaster II safety helmet with ratchet head size adjustment
• Optional Protector ear defenders
• Smooth action flip up visor in Polycarbonate or Acetate
• Broad face seal for comfortable efficient fit
Approvals: EN: 12941, EN: 1835, EN:166, EN: 397 & EN: 352-3 Hearing (Optional).
• Enhanced anti-static polyurethanematerial
• Easy to clean and decontaminate
• Taped seams prevent liquid ingress
• Provides highest protection factor
• Overcomes fit issues, such asspectacles and beards.
Approvals: EN: 12941, EN: 1835
• Designed for use with existing PPE(welding shields, ear defenders,helmets, goggles)
• Utilises proven Protector R40/R60half mask
• Comfortable soft silicone facepiece
• Choice of two sizes
• Unobtrusive side hose fitting
• Polyurethane material provideshigh resistance to a wide range ofchemicals
• Nonrestrictive field of vision
• Provides highest protection factor
• Overcomes fit issues, such asspectacles and beards
• Easy to decontaminate includingin an autoclave
Approvals: EN: 12941, EN: 1835
• Designed for use with existing PPE(welding shields, ear defenders,helmets, goggles)
• Utilises proven Protector R40/R60half mask
• Comfortable soft silicone facepiece
• Choice of two sizes
• Unobtrusive side hose fitting
Approvals: EN: 12942
“Green Arrow”: FRP Box with SS reel facility for storage of Breathing hose & Mask/Hood.
